$45.80
Replacement tail with receiver (no metal bracket) with liquid capability and a milled top. This Keeton is to be used with K608 Mojo wire (sold separate) for EXTRA PRESSURE. Fits ALL drill models, except for Sunflower (also recommended for Great Plains Yield Pro planters). If not using K608 Mojo, order the standard drill tail (non-modified), sku# 120825.
Drill Keeton, SHAVED FULL-LENGTH tail and full bracket
COMPATIBLE EQUIPMENT: Crustbuster, Great Plains Drill, Krause, Marliss, Tye, Case-IH / NH Flexi-coil, JD 450, 455, 1520 drill, JD 750, 1850 Drill, Great Plains Planter, JD 90-series Drill, JD 60-series Drill
LEGACY P/N WAS 120825-3 – Drill Keeton, shaved full-length tail and full RECEIVER (bracket)
| Weight | .4 lbs |
|---|---|
| Dimensions | 16 × 2 × .5 in |
| Compatible Equipment | Tye, Case-IH / NH Flexi-coil, JD 450, 455, 1520 drill, JD 750, 1850 Drill, Great Plains Planter, JD 90-series Drill, JD 60-series Drill, Crustbuster, Great Plains Drill, Krause, Marliss |
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
