Includes replacement outer hub seal to fit pro and non-pro series, and replacement inner hub axle spacer seal to fit all non-pro series, and pro series prior to s/n 795300 (or spacer used with replacement greaseless axle kit installation on pro series).
Replaces JD B13294 and AN281241.
**Does not include direct replacement for JD A114711 OEM seals used on s/n 795301+ pro series axle tube nut**
KIT-SEAL, DISC OPENER HUB – JD ALL 90/95/N SERIES
$10.80
Includes replacement outer hub seal to fit pro and non-pro series, and replacement inner hub axle spacer seal to fit all non-pro series, and pro series prior to s/n 795300 (or spacer used with replacement greaseless axle kit installation on pro series).
Replaces JD B13294 and AN281241.
**Does not include direct replacement for JD A114711 OEM seals used on s/n 795301+ pro series axle tube nut**
You must be logged in to post a review.
Related products
- Call for Price$0.61$7.50Grease seal installs on o.d. of opener hub, mates with sleeve 50-11146. Replaces JD p/n AN281241$2.50Wear ring installs in I.D. of opener hub, mates with seal 50-10947. Replaces JD p/n N219000
- $6.65SKU: 04-11085 Adapter Kit for 7340/7360 Airguard to allow 1-1/8″ OD hose to fit inlet and outlet ports.$6.65Adapter Kit to allow 1-1/4″ OD hose to fit inlet and outlet ports.$58.00Clamp for seed tubes that increases clamping power by 2x with ‘teeth’ that grip. 3-4in-1 3-4in (19-44mm). Comes in packages of 20.$140.80For large & small seed & fertilizer. Run higher fan speeds to prevent line plugs while venting air to prevent seed from blowing out of the furrow. The spiral tube design further maintains seed uniformity to stop clumps of seeds in the furrow. Adjustable air exhaust port.$58.08For large & small seed only. Run higher fan speeds to prevent line plugs while venting air to prevent seed from blowing out of the furrow. The spiral tube design further maintains seed uniformity to stop clumps of seeds in the furrow. Adjustable air exhaust port.$42.95STRAIGHT STAINLESS STEEL SEED TUBE WITH CLAMP AND RETAINING BOLT FOR JD 90/N SERIES$47.96RH STAINLESS STEEL SEED TUBE WITH CLAMP AND RETAINING BOLT FOR JD 90/N SERIES$47.96LH STAINLESS STEEL SEED TUBE WITH CLAMP AND RETAINING BOLT FOR JD 90/N SERIES
Content of this page is copyright 2005-2025 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
Reviews
There are no reviews yet.