Skip to content
Free shipping over $2,500
Closing arm pivot kit.

Closing Arm Pivot Kit- JD 50/60/90/N Series

$48.00

Sleeve, bushings & seals for closing arm’s pivot, JD 50/60/90 drills (excluding earliest 750s). Chromed steel sleeve is 86mm long for 50/60/90s (doesn’t fit the earliest 750s).

SKU: 50-10493 Category:

Sleeve, bushings & seals for closing arm pivot, JD 50/60/90/N drills (excluding earliest 750s). Chromed steel sleeve is 86mm long.

LEGACY P/N WAS ARI NG86 – Closing Arm Pivot Bushing Kits for JD 50/60/90 drill

You may also like…

Related products

  • Main Bushing Tool Manual Kit

    Main Bushing Tool Manual Kit

    Kit-Removal Tool for Main-Pin Bushings, JD 50/60/90 drills, Manual Tool Manual removal tool for the bushings of the front/main pin of JD 50/60/90 drill openers. Use this to pull the bushings out. Kit includes stainless tube brush to clean out dirt and rust. Also includes lubricant. FOR USE WITH IMPACT WRENCH LEGACY P/N WAS ARI 003M - UPDATED Removal Tool for Main-Pin Bushings, JD 50/60/90 drills, Manual Tool
    $175.42
    Add
    Info
  • Placeholder

    Firming Pivot Nut & Washer Kit- JD 50/60/90

    LEGACY P/N WAS ARI 007 - Flange Locknut and washer for firming pivot point
    $1.68
    Add
    Info
  • Closing pivot nut and washer kit.

    Closing Pivot Nut & Washer Kit- JD 50/60/90

    Grade 8 washer (special ID) and grade 8 special flange locknut (smooth underside; no serrations) for closing arm pivot point, JD 50/60/90 drill. Corresponding OEM parts are only grade 5, and wear out fairly quickly, which creates side-play and lets the spring for the closing arm pop out of its setting too easily.
    $4.68
    Add
    Info
  • Main Bushing Tool Kit- Air Hammer

    Main Bushing Tool Kit- Air Hammer

    Kit-Removal Tool for Main-Pin Bushings, JD 50/60/90 drills, Air Hammer LEGACY P/N WAS ARI 003A - Updated Removal Tool for Main-Pin Bushings, JD 50/60/90 drills, Air Hammer
    $80.20
    Add
    Info

Keep In Touch

X-twitter Facebook-f Youtube Instagram Envelope
Download Catalog

Content of this page is copyright 2005-2025 Exapta Solutions, Inc. (reprint with written permission only).

Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.