Shop

  • The BullsEye Seed Tube reduces seed ricochet and improves wear life.This model fits Deere 7000/7100 series, Kinze 2000/3000(except Edgevac) series,and Great Plains Yield pro planters with either a 1/2” or 3/4” sensor eye hole.
    $16.50
  • The BullsEye Seed Tube reduces seed ricochet and improves wear life. This model fits White 5100(Modification Required),6000, 8000 and 9000 series planters with either a 1/2” or 3/4” sensor eye hole.
    $16.50
  • The BullsEye Seed Tube reduces seed ricochet and improves wear life. This model fits Deere 7200/7300, and 1700 series planters with either a 1/2” or 3/4” sensor eye hole. Deere 7200/7300 and 1700 series (Model year 2006 and before) will also require part number 04-10602 (Pin & Clip kit) for installation. Deere 1700 series (Model year 2007 and later) require 04-10601 (Spring Pin Kit). COMPATIBLE EQUIPMENT: JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), Kinze 3000
    $16.50
  • The BullsEye Seed Tube reduces seed ricochet and improves wear life. This model fits Monosem planters with either a 1/2” or 3/4” sensor eye hole.
    $16.50
  • The Universal Bracket fits Deere 7000s thru XP (& Max-Emerge 5 [without BrushBelt] if brkt legs cut & hole drilled in shank, or if converted to XP guards), Kinze 2000s, White 6000s – 9000s, & some Kinze 3000s (non-EdgeVac, prior to 2013). (Kinze EdgeVac & all 2013 & newer models [including 4900] need Scraper-Mount bracket instead.) (ME5 with BrushBelt needs Quick Attach Keeton.) Note: We recommend Quick Attach Keetons for all planter models that they fit — they’re much more robust and trouble-free as compared to the Universals.  Universal Brackets now pre-cut by Exapta for full Mojo compatibility & fast install. No liquid capability (='Dry' tail).
    $34.00
  • The Universal Bracket fits Deere 7000s thru XP (& Max-Emerge 5 [without BrushBelt] if brkt legs cut & hole drilled in shank, or if converted to XP guards), Kinze 2000s, White 6000s – 9000s, & some Kinze 3000s (non-EdgeVac, prior to 2013). (Kinze EdgeVac & all 2013 & newer models [including 4900] need Scraper-Mount bracket instead.) (ME5 with BrushBelt needs Quick Attach Keeton.) Note: We recommend Quick Attach Keetons for all planter models that they fit — they’re much more robust and trouble-free as compared to the Universals.  Universal Brackets now pre-cut by Exapta for full Mojo compatibility & fast install. No liquid capability (='Dry' tail).
    $34.00
  • The Universal Bracket fits Deere 7000s thru XP (& Max-Emerge 5 [without BrushBelt] if brkt legs cut & hole drilled in shank, or if converted to XP guards), Kinze 2000s, White 6000s – 9000s, & some Kinze 3000s (non-EdgeVac, prior to 2013). (Kinze EdgeVac & all 2013 & newer models [including 4900] need Scraper-Mount bracket instead.) (ME5 with BrushBelt needs Quick Attach Keeton.
    $34.00
  • 1.25" for Mojos using plastic blocks (Liquid-ready Keetons)
    $1.25
  • Shorter (1") hose clamp, For Mojo Wires that don't use plastic blocks, i.e., Mojo Wire clamps directly onto firmer.
    $1.25
  • DOESN'T include wings, bushings, or fasteners (see Valion kits).
    $51.62
  • DOES NOT include wings or fasteners (see the Valion complete kit).
    $50.25
  • Bushing, 5/8" OD, ~ 5/16" ID x 0.335", hardened (both attachment points of Valion to Kinze 2000 or JD pre-XP shank).
    $2.34

All About Hydraulic Oil Coolers & Snorkel Kits

AirGuard Oil Cooler/ Heat Exchanger for New Holland P4460/ P4950 Aircarts.

Stay cool; prevent clogging

Hydraulic oil coolers function by circulating oil through a radiator connected to a fan, which forces air over the radiator. This process cools the hydraulic oil while simultaneously warming the air entering the lines, helping to prevent clogging from sticky fertilizers and seed treatments.

When run with a snorkel, it helps remove humidity by pulling drier air from higher up, which is also cleaner air, so you reduce the amount of dust and debris that could cover the radiator. Snorkel kits are available with or without the oil coolers, for air carts and air boom applicators.

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.