Shop
- $29.50(PP# 120107) Keeton seed firmer, 2-piece design with replaceable tail w/ liquid capability. All 00HD series row units: 2S-2600HD, 3S-3000HD, 3S-4000HD and 3S-4000HDA. Also available with milled top for use with our K.608 Mojo -- call or email to order milled version of this Keeton ($4 extra).$29.50(PP# 120105) Keeton seed firmer, 2-piece design with replaceable tail w/ liquid capability. All 25 series planter style row units and HD10 series row units: YP1225, YP1625, YP2425, 1525P, 1510HDP, 1510HDF, 2010HDP & F, 2020HDP & F, 2025P & F and 2520P. Also available with milled top for use with our K.608 Mojo -- call or email to order milled version of this Keeton ($4 extra).$29.50Keeton seed firmer, 2-piece design with replaceable tail w/ liquid capability. Fits Great Plains fluted series with parallel unit mounting arms, 13-1/2" openers and meter mounted to row unit. With liquid tube. Also available with milled top for use with our K.608 Mojo -- call or email to order milled version of this Keeton ($4 extra).$48.50
Keeton Quick Attach bracket and standard tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000, 4000 series planters with SpeedTube, WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.
$40.00Keeton Quick Attach bracket and standard tail with single liquid tube for White 9000s (doesn't fit White 6000s & 8000s—use Universals instead for those planters).
$45.80ONLY for Case P-500/NH 2080 OEM, SKU 120825-2. Replacement tail, 2-pc Keeton w/ chopped receiver & milled top, chopped tail. For use with OEM closing, or any closing other than Exapta's (which moves the closing wheel rearward for more clearance). K 608 Mojo wire fits this tail. Must have Exapta steel bracket to install.$45.80Replacement full-length tail, ONLY for Case P-500/NH 2080 T-Wheel, SKU 120825-1. 2-piece drill Keeton, with chopped receiver & milled top, but full-length, using Exapta's closing system. For use with K.608 Mojo. Must have Exapta steel bracket to install.$260.00SeedVU, for Seed Hawk, Salford drills (Raycol head).$45.80Replacement tail with receiver (no metal bracket) with liquid capability and a milled top. This Keeton is to be used with K608 Mojo wire (sold separate) for EXTRA PRESSURE. Fits ALL drill models, except for Sunflower (also recommended for Great Plains Yield Pro planters). If not using K608 Mojo, order the standard drill tail (non-modified), sku# 120825.$27.50Keeton seed firmer, replacement tail with receiver (no metal bracket) with liquid capability. Fits ALL drill models, except for Sunflower (also recommended for Great Plains Yield Pro planters). Also available with a milled top (Keeton sku #120825-3) for use with our K.608 Mojo for extra pressure and ruggedness.$6.00For seed boot on JD 50, 60 & 90-series NT drills. Must be trimmed or modified to fit 60 series boot. Manufactured to Exapta’s high-quality specs for longer service life (less breakage, maintains strength) and 20% more force applied to the boot. Replaces Deere N284055 & N280485.$7.30Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots, 7/8 x 5" (includes 1/4"x1"bolt). DOES NOT FIT PRO-SERIES US Patent 9,668,402
All About Hydraulic Oil Coolers & Snorkel Kits
Stay cool; prevent clogging
Hydraulic oil coolers function by circulating oil through a radiator connected to a fan, which forces air over the radiator. This process cools the hydraulic oil while simultaneously warming the air entering the lines, helping to prevent clogging from sticky fertilizers and seed treatments. When run with a snorkel, it helps remove humidity by pulling drier air from higher up, which is also cleaner air, so you reduce the amount of dust and debris that could cover the radiator. Snorkel kits are available with or without the oil coolers, for air carts and air boom applicators.
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
