Skip to content
Free shipping over $2,500

Ingersoll Blades Testimonials

See what Exapta customers have to say about Ingersoll blades.
“We had JD, Ingersoll, and Argis blades on an 1850. The blade that wore the most—was the smallest in diameter—was the JD [Osmundson] blade, followed by Argis. The Ingersoll blade was the largest in diameter.” [statement circa 2014]
Fred DunlopStayner, Ontario
“Your blades cut AWESOME. I’ve never had a bad product from you guys [Exapta].”
Dave DelhotalWest Brooklyn, IL, Exapta customer since 2014
Dave Delhotal
“This is my 2nd set of Ingersoll blades and I’ve been very happy with them.”
Ryan OlsonErwin, SD, Exapta customer since 2015 (Ingersoll blades on JD 1850)
“The Ingersoll blades worked great, I didn’t have any trouble with them. Very pleased!”
Steven HuettigHazelton, ID, Exapta customer since 2014
Steven Huettig
“Exapta’s blades are probably the best out there right now. Stay sharper and last longer compared to JD or Shoup.”
Jordan ReimnitzArmour, SD, Exapta customer since 2009 (Exapta blades on JD 1860 air drill)
Jordan Reimnitz
“Night and day difference between your Ingersolls and the JD blades. I really like how sharp your blade stays.”
Dennis Erickson
“The Ingersoll blades worked great. Very pleased!”
Steven HuettigHazelton, ID, Exapta customer since 2014 (JD 1990 CCS)
“We had JD, Ingersoll, and Argis blades on an 1850. The blade that wore the most—was the smallest in diameter—was the JD blade, followed by Argis. The Ingersoll blade was the largest in diameter.”
Fred DunlopStayner, Ontario
“We love the Ingersoll blades. We usually run [the competitor’s non-Ingersoll] blades and by the end of the season, the bevel would be completely gone—they were shot. But your blades still had a bevel and were sharp.”
Alvin ShafferDalmatia, PA, Exapta customer since 2012 (Exapta's Ingersoll-Canada blades on JD 1990 air drill)

Keep In Touch

X-twitter Facebook-f Youtube Instagram Envelope
Download Catalog

Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).

Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.