LEGACY P/N WAS L 2200 – Mur-lok tubing connector, auto lock (push ring to release)
For 1/4 OD tubing. Mur-lok Quick Connect, auto-lock, push ring towards connector body to release tubing.
COMPATIBLE EQUIPMENT: White 6000 Planter, White 8000 Planter, White 9000 Planter, Planters, Great Plains Planter, JD 1700 MaxEmerge 5, Monosem, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 4900, Kinze 3000 Series, Kinze 2000 Series
FITTING-PUSH TO CONNECT, MUR-LOK
$2.17
For 1/4″ OD tubing. Mur-lok Quick Connect, auto-lock, push ring towards connector body to release tubing.
| Weight | .3 lbs |
|---|---|
| Dimensions | .62 × .62 × 1.62 in |
| Compatible Equipment | Monosem, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 4900, Kinze 3000 Series, Kinze 2000 Series, White 6000 Planter, White 8000 Planter, White 9000 Planter, Planters, Great Plains Planter, JD 1700 MaxEmerge 5 |
Related products
- $1766.09For use with Valions. High-temp semi-rigid plastic. COMPATIBLE EQUIPMENT: Planters, JD 1700 MaxEmerge 5, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 4900, Kinze 3000 Series, Kinze 2000 Series" LEGACY P/N WAS L 1150FT - Plastic Tubing, 50' Uncut, Heat Resistant 1/4" OD$0.28Hex-head capscrew, gr 8, 5/16" X 5/8" (attaches wings to Valion), uses dimple-lock 5/16" jamnut.$51.62Doesn't include wings, bushings, or fasteners (see Valion kits).$25.00Heavy-duty liquid tube holder, protects 1/4" OD plastic tube on front of shank: JD 7200, 7300, and JD 'Pro' heavy-duty welded shank ('03 and '04). Also fits Harvest International units. **Our heat-resistant tubing is recommended for Valions.** Heat-resistant tubing sold separately. Not compatible with JD heavy-duty scrapers that attach to the front of the shank. For JD XP and ME5 shanks, see our L.454 liquid tube holder (not compatible with ExactEmerge's BrushBelt). For JD 7000 & Kinze 2000s, see our L.133 tube holder.
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
