Skip to content
Free shipping over $2,500
STABILIZER-SEED BOOT, PRO-STITCH 60/90
STABILIZER-SEED BOOT, PRO-STITCH 60/90 - Image 2

STABILIZER-SEED BOOT, PRO-STITCH 60/90

$40.00

For JD 90-series boots. Patented, simple, bolton device designed to fit between the main opener arm boot pivot flanges and the seed boot, eliminating the up and down movement of the seed boot and allowing for a consistent furrow and more even seed placement. Includes necessary hardware & new seed boot pivot pin.

SKU: 04-10573 Categories: , ,

For JD 90-series boots. Patented, simple, bolt on device designed to fit between the main opener arm boot pivot flanges and the seed boot, eliminating the up and down movement of the seed boot and allowing for a consistent furrow and more even seed placement. Includes necessary hardware & new seed boot pivot pin. US PATENT 9,485,903

Compatible with the following part numbers: N284025, N284024, N284045, N284044, A109343, A109344 

LEGACY P/N WAS PS 100 – PS Seed Boot 60/90 series Stabilizer (AG-K07-ST) US PATENT 9,485,903

Weight.75 lbs
Dimensions4 × 3 × 1 in

Related products

  • Aricks T handle for John Deere drills

    HANDLE-T, JD 60/90/N DRILLS

    A durable, logical replacement for the light-duty, inferior, criss-cross depth adjuster that rattles and wears out.  A much-needed redesign of the traditional diagonal slotting for a simpler, heavy-duty system that will withstand tough conditions better than the OEM. These T-handles don’t jam into the cover plate like the OEM ones do after they wear down on the pins.
    $35.00
    Add
    Info

  • KIT-ARICKS SEED BOOT SHOULDER BOLT & NUT

    Clamps tight against shank ears; boot swivels on bolt. Eliminates slop in boot attachment for better seed placement. Works perfectly with Needham boots, or drill out other brands of boots to fit (shoulders are 16mm diameter).

    $12.00
    Add
    Info
  • Aricks cover plate for JD drills

    WA-COVER PLATE DEPTH ADJUST, JD 60/90/N DRILLS

    2x thickness of OEM. Straight-across depth selection for easy adjusting. A durable, logical replacement for the light-duty, inferior criss-cross depth adjuster that rattles and wears out. A much-needed redesign of the traditional diagonal slotting for a simpler, heavy-duty system that will withstand tough conditions better than the OEM. Same depth increments as OEM.
    $35.00
    Add
    Info
  • UniForce Hydraulic Downpressure system on JD equipment.

    Hydr cylinder kit for 1 row, TOP port (also includes drop hose)or JD 60 & 90 series, and 2510H

    Call to order: 785-820-8000. Fits all John Deere 60 & 90-series box drills and air drills. Overcomes the biggest limitation of these drills, which is lack of down-stroke as the coil spring relaxes slightly (only a teeny range of optimum spring pressure—like, 0.25")
    Call for Price
    Info

Keep In Touch

X-twitter Facebook-f Youtube Instagram Envelope
Download Catalog

Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).

Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.