Skip to content
Free shipping over $2,500
Search
Close this search box.

KIT-SEED FLAP, STD NINJA, JD 50/90 SERIES

$7.30

Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots, 7/8 x 5″ (includes 1/4″x1″bolt). DOES NOT FIT PRO-SERIES US Patent 9,668,402

SKU: 04-10800 Categories: ,

Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots, 7/8 x 5″ (includes 1/4″x1″bolt). For Pro series boot, see different kit. US Patent 9,668,402
COMPATIBLE EQUIPMENT: JD 750, 1850 Drill, JD 90-series Drill

For std wear boots listed below, order flap and bolt individually, u-nut not req’d:
N284044 – std wear boot RH 90 series, threaded hole
N284045 – std wear boot LH 90 series – threaded hole

LEGACY P/N WAS M 4708 – KIT-NINJA STD SEED BOOT FLAP, JD

Weight.05 lbs
Dimensions6 × 1 × .5 in
Compatible Equipment

JD 750, 1850 Drill, JD 90-series Drill

Related products

  • Aricks T handle for John Deere drills

    HANDLE-T, JD 60/90/N DRILLS

    A durable, logical replacement for the light-duty, inferior, criss-cross depth adjuster that rattles and wears out.  A much-needed redesign of the traditional diagonal slotting for a simpler, heavy-duty system that will withstand tough conditions better than the OEM. These T-handles don’t jam into the cover plate like the OEM ones do after they wear down on the pins.
    $35.00
    Add
    Info

  • STABILIZER-SEED BOOT, PRO-STITCH 60/90

    For JD 90-series boots. Patented, simple, bolton device designed to fit between the main opener arm boot pivot flanges and the seed boot, eliminating the up and down movement of the seed boot and allowing for a consistent furrow and more even seed placement. Includes necessary hardware & new seed boot pivot pin.

    $40.00
    Add
    Info

  • Complete Upgrade, CIH P-500 drill

    Keeton + Mojo + Keeton mounting bracket kit + closing bracket kit + Thompson wheel.
    $269.25
    Options
    Info

  • BEARING-BALL, DOUBLE ROW PEER (G WHEEL)

    Double-row ball bearing: fits gauge wheels on many planters (JD '92 and newer, Kinze '93 and newer, White 6000 and 8000), gauge wheels on JD 50/60/90-series drills, and closing arm on JD 60 and 90-series drills.
    $15.34
    Add
    Info

Keep In Touch

X-twitter Facebook-f Youtube Instagram Envelope
Download Catalog

Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).

Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.