For seed boot on JD 50, 60 & 90-series NT drills. Must be trimmed or modified to fit 60 series boot. Manufactured to Exapta high-quality specs for longer service life (less breakage, maintains strength) and 20% more force applied to the boot. Zinc plated to prevent rust. Replaces Deere N284055 & N280485.
COMPATIBLE EQUIPMENT: JD 60-series Drill, JD 750, 1850 Drill, JD 90-series Drill
SPRING-LEAF, JD SEED BOOT
$6.00
For seed boot on JD 50, 60 & 90-series NT drills. Must be trimmed or modified to fit 60 series boot. Manufactured to Exapta’s high-quality specs for longer service life (less breakage, maintains strength) and 20% more force applied to the boot. Replaces Deere N284055 & N280485.
| Weight | .13 lbs |
|---|---|
| Dimensions | 2.5 × 1 × 1.5 in |
| Compatible Equipment | JD 750, 1850 Drill, JD 90-series Drill, JD 60-series Drill |
You may also like…
- $94.00Thompson Wheel T44 with stub shaft, for JD 60/90/Pro-series drills. Zinc plate finish, Bolt-on star wheel = cost-effective replacement stars. Made from military-grade armor plating, for even longer wear life. Includes 1 wheel, 4 bolts, 1 spindle/shaft. For orders of 32 or more, please call for freight truck pricing. US Patent No 6,907,833$50.00Fits JD 50/60/90/Pro-series drills, as well as Case’s SDX. Narrow, sleek wheel that's proven to shed mud better than OEM & other aftermarket firming wheels. Now with chamfered hub to let dirt fall away more easily, for better bearing life. And UV-resistant material to hold a bright yellow color for years.$7.30
Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots, 7/8 x 5" (includes 1/4"x1"bolt). DOES NOT FIT PRO-SERIES US Patent 9,668,402
$15.34Double-row ball bearing: fits gauge wheels on many planters (JD '92 and newer, Kinze '93 and newer, White 6000 and 8000), gauge wheels on JD 50/60/90-series drills, and closing arm on JD 60 and 90-series drills.Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
