Skip to content
Free shipping over $2,500
Opener blade for JD ME5/XP, KINZE 3000/4000/5000 15" planters.

KIT-DISC OPENER, FDN 205, JD ME5/XP, KINZE 3000/4000/5000 15″ (W/ CAP)

$55.08

20% more wear life than OEM / Ingersoll / Bellota. The Forges de Niaux takes it to the next level with a unique steel and special heat-treat process. Same dimensions as OEM. Uses Peer double-row 205 bearings, whereas OEM and other aftermarket are double-row 204 bearings (smaller diameter). They also use 5/16″ rivets instead of 1/4″.

SKU: 03-10960 Category:

20% more wear life than OEM / Ingersoll / Bellota. The Forges de Niaux takes it to the next level with a unique steel and special heat-treat process. Same dimensions as OEM. Uses Peer double-row 205 bearings, whereas OEM and other aftermarket are double-row 204 bearings (smaller diameter). They also use 5/16″ rivets instead of 1/4″
For KINZE 3000/4000 series – requires bolt kit 50-11051 (1-3/4″ long bolts) if replacing OEM or single row bearing opener (1-1/2″ long bolt)

(REPLACED USE OF DISC ONLY P/N 03-10517)

Weight8 lbs
Dimensions15 × 15 × 2.5 in

You may also like…

  • Forges-opener-blades-planters

    DISC-OPENER, FDN 204, JD ME+ 15″

    Forges de Niaux’s superior blades for JD MaxEmerge PLUS (Pre-XP) and Kinze. Same dimensions as OEM, but with the greater durability of the Forges de Niaux!  Harder on the periphery, for 20% greater wear life. Peer 204 bearing and ¼" rivet. Stays sharper longer.

    $47.92
    Add
    Info

Related products

Keep In Touch

X-twitter Facebook-f Youtube Instagram Envelope
Download Catalog

Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).

Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.