25% more force than OEM to reduce straw tucking between boot & blade. Special ultra-durable paint process prevents rust.
COMPATIBLE EQUIPMENT: Case Precision 500
Coil Spring, for boot/scraper on CIH P-500/NH 2080oil Spring
$5.81
25% more force than OEM to reduce straw tucking between boot & blade. Special ultra-durable paint process prevents rust.
| Weight | 0.63 lbs |
|---|---|
| Dimensions | 1.75 × 1 × 1 in |
| Compatible Equipment | Case Precision 500 |
Related products
- $269.25Keeton + Mojo + Keeton mounting bracket kit + closing bracket kit + Thompson wheel.Call for PriceCall to order: 785-820-8000. Fits all John Deere 60 & 90-series box drills and air drills. Overcomes the biggest limitation of these drills, which is lack of down-stroke as the coil spring relaxes slightly (only a teeny range of optimum spring pressure—like, 0.25")$45.80ONLY for Case P-500/NH 2080 OEM, SKU 120825-2. Replacement tail, 2-pc Keeton w/ chopped receiver & milled top, chopped tail. For use with OEM closing, or any closing other than Exapta's (which moves the closing wheel rearward for more clearance). K 608 Mojo wire fits this tail. Must have Exapta steel bracket to install.$7.30
Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots, 7/8 x 5" (includes 1/4"x1"bolt). DOES NOT FIT PRO-SERIES US Patent 9,668,402
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
