Hose clamp for air seeder and planter hoses that increases clamping power by 2x. Size 48 – 2 1-2in — 3 1-2in (64-89mm) – Pack of 10pcs
AIRGUARD SABRE CLAMP – 64-89MM – SS – #48 – PACKAGE OF 10PCS
$38.50
Related products
- $260.69Air Seeder Seed Hose 1.25" I.D. (sold in 100ft rolls). Our secondary hosing is made from PVC blended with polyurethane for up to 2x the wear life of OEM. UV protection for longer wear life in the field. Plus, our secondary hose is the same transparent, see-through spirals as Primary Hose, allowing you to see when product is flowing or locate a blockage. LEGACY P/N WAS ASH 1.25" - 1 -1/4" URETHANE AIR SEEDER HOSE$795.00Air Seeder Hose Primary 2.5" (sold in 100ft rolls). Our primary hoses are the best on the market, lasting 2x – 3x longer than any other hose during internal sandblast testing. Constructed with a urethane lining in place of the ‘blended’ materials used by OEM & competitor hoses. UV protection to withstand sunlight decay. Transparent black, see-through spirals in material allows you to detect/locate blockages immediately.$225.00Air Seeder Hose Primary 2.5" (sold in 100ft rolls). Our primary hoses are the best on the market, lasting 2x – 3x longer than any other hose during internal sandblast testing. Constructed with a urethane lining in place of the ‘blended’ materials used by OEM & competitor hoses. UV protection to withstand sunlight decay. Transparent black, see-through spirals in material allows you to detect/locate blockages immediately.$245.00Air Seeder Hose Secondary 1" (sold in 100ft rolls). Our secondary hosing is made from PVC blended with polyurethane for up to 2x the wear life of OEM. UV protection for longer wear life in the field. Plus, our secondary hose is the same transparent, see-through spirals as Primary Hose, allowing you to see when product is flowing or locate a blockage.
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting, to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
Reviews
There are no reviews yet.